1. Install the screen window, first cut the screen screen into the size equal to the size of the inner frame of the door, then roll a narrow strip of cloth on the four sides to make it not burr, and then sew one of the velcro on the window screen. On the four sides of the cloth, the velcro that matches it will be attached to the door (window) frame with the "sticker", and finally the window screen will be installed.
2, the marble door lock needs to prevent smashing, the marble door lock is used for a long time, often it will dry up, and it is not easy to open and close. In this case, you can drop the oil on the two sides of the activity lock or wipe it with soap for a few times. The door lock is flexible and flexible, and it can be opened and closed freely.
3, can make self-made elastic block, the copper door of the home often has to switch. When the copper door is opened, it often directly hits the wall. For a long time, the lock box and handle on the door are easy to touch the wall and damage. Wall and copper doors, affecting the appearance. You can find a rubber block about 5 cm thick or a thick rubber on a small wooden block, and nail it into the lower corner of the side of the hinge in the copper door, so that the copper door will not be damaged.
4. If the copper door is not blown away by the wind, if the copper door in the home is closed, if it is easy to be blown off by the wind or not opened, it is neither convenient nor safe. You can find a strong magnet of appropriate size and bury it in the door frame. The upper part is about 1/4 of the height of the door, and then a piece of iron is nailed to the place where the door leaf matches the door frame. After closing the door and sucking each other, the door and window can be prevented from being blown away by the wind. Cupboards, wardrobes, windows, etc. can also be handled by this method.
