As the first guarantee for the unit tenants, the building door must work hard during the installation. So for the safety of everyone, we will give you the attention to the installation details of the building door:
1. The installation of engineering building doors should be in accordance with the type of engineering building doors used, and adopt appropriate installation methods.
2. The sliding door is required to be pushed and pulled flexibly after installation, the swing door is easy to open, and the closing is tight and firm.
3. The door frame of the engineering building door can be fixed with the expansion bolts and the wall. When the wall is built, the iron parts are pre-embedded at the hole, and the connecting parts of the door frame are welded firmly.
4. Regardless of the connection method used for the door frame and the wall, there should be no less than 3 anchor points on each side, and it should be firmly connected.
5. The hardware accessories such as handles, door locks, intercom system, observation holes, etc. on the door of the engineering building must be complete; the password lock, electronic alarm cryptosystem, doorbell paging and other devices on the door of the multi-purpose engineering building must be effective. perfect.
6. When installing the building door, it should be straightened and hoisted. After the size is appropriate, it will be temporarily fixed, and the building will be corrected and adjusted. The building door is the first guarantee of a unit household and the connection can be anchored.
7. The clearance between the requirements and the ground plane should be no more than 5mm.
8. Anti-theft device should be installed between the door frame and the door leaf or other parts.
Have you learned the details of the installation of the above building doors? At present, we often see that some building doors have become a device for a long time, and can no longer automatically close. Learning these points can improve the service life of building doors.
